I replaced the front bearings in my ss a while back. Show it side to side recently and noticed at least 3/8" of an inch of movement. Turns out the a-arms are moving up and down about 1/4", my question is how much play are you guys seeing? About to do a complete refresh on the buggy and looks like i'm going to have to add this to the list. Thanks

I'M not sure on those, contact Glade at edgepowersports. hes in the truted dealer section.

I'm having a hard time picturing what you are describing:

1. The a-arms pivot on bushings - Are these worn?
2. The arms connect to the spindle via ball joints - Do you see slop in the ball and cup?
3. The arms are suspended by the front shocks that also use bushings - Are these bushings worn?
4. The hubs sit on bearings - Is the I.D. of the bearing on the spindle correct? Is the spindle nut tighten sufficiently?

Ah i see now i didn't explain that right at all lol. say if you bent over and grabbed the top a-arm with your hands you could like it up away from the spindle. The balljoint itself is pulling apart from the cup( if that makes sense). Gonna order them anyways.Thanks