Figured I would make a new thread to show what I bought. As I said in my other thread, it needs a wiring harness, fuel pump and carb according to the guy I bought it from. Its a NST 250 Buggy. That is about as much as I know. I put the parts together so that it looks normal, just took some pictures. Should be a fun project this winter.
Its not perfect, and it needs some work but its should teach me lots and bring me up to scene with the buggy game.
That thing looks good for a 500 buck buggy Now I wouldn't just buy a carb. Gp get a bucket of carb cleaner. Take the carb apart and if need be take pics of each section so you remember how it goes. Let it soak a day or so. Send Pgh or Pud a PM about your electrics. They should be able to get you going there. I dont think it has a fuel pump but I may be wrong. What may have happened is the vacum feed went bad. You can by pass that for a gravity feed. Do the fuel line and electrics while the carb is soaking and you could have all your answers by tommorow night
Problem is, he didnt give me the bad carb. there was a black sock stuffed in the intake, pulled that out and looked in with a LED flashlight.....looks good. pushed the buggy in "gear" and the motor rolled over. so if its in fwd then it must be in first gear.
just emailed the guy about the old carb. Really want it. Wiring I think we could figure out, but the no carb thing....i dont know where to start.
Joined: Tue Jul 03, 2007 1:24 pm Posts: 119 Location: Perth Western Australia
That looks to me like a Kinroad sahara,,,, exactly the same as mine,,,, just remove all the blue plastics stuff,, and she's a dead ringer! good rig mate
_________________ James from West Ozzz 2 x 250 Sahara's 19gm sliders, Blue Polini 2000 clutch springs 135 & 140 jets, Irridium plugs, KnN air filters Dr Pulley HIT clutches, Rear skid plate, Front end shroud
Joined: Fri Jun 20, 2008 10:48 am Posts: 4 Location: St. George, Utah
I agree, looks like a Kinroad. You are going to want to raise the gas tank a couple of inches or you will be replacing the vacuum fuel petcock on a regular basis.
I agree, looks like a Kinroad. You are going to want to raise the gas tank a couple of inches or you will be replacing the vacuum fuel petcock on a regular basis.
Or maybe that was just me.
Want to take some good pics of your buggy and send them to me? We are confused on where the wires go.
Hooked a battery charger up to it and sprayed gas in the intake and she fired right up. I am shocked how much the carb's are for these. Anyone got one they want to sell?
I got one. I blew the motor and rebuilt it with a 30mm slide. Dont have any jets though and it's been sitting. I can look at the diprahm to see if it looks ok but thats the best I can do. 20 bucks.
I would look at all your options because again it's been sitting
I got one. I blew the motor and rebuilt it with a 30mm slide. Dont have any jets though and it's been sitting. I can look at the diprahm to see if it looks ok but thats the best I can do. 20 bucks.
I would look at all your options because again it's been sitting
Is it for exactly my buggy? Any pics? Do you have paypal?
Users browsing this forum: No registered users and 0 guests
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
Now I wouldn't just buy a carb. Gp get a bucket of carb cleaner. Take the carb apart and if need be take pics of each section so you remember how it goes. Let it soak a day or so. Send Pgh or Pud a PM about your electrics. They should be able to get you going there. I dont think it has a fuel pump but I may be wrong. What may have happened is the vacum feed went bad. You can by pass that for a gravity feed. Do the fuel line and electrics while the carb is soaking and you could have all your answers by tommorow night
