I was wondering if anyone knows where I would be able to get a master brake cylinder for a kinroad 250cc buggy, or if I could get a rebuild kit if one is out there. I think mine isn't working right.

My buggy doesn't seem to want to stop right away, I hit the brakes and it slows a little but it feels like brake peddel is not engageing. It takes about 50 ft to stop it on a level street when it is going about 30Mph. I know the lines are good and brake fluid is not leaking from anything because the fluid level is fine, and I can't find any fluid on the ground. It has been sitting in the garage for about 3 months with out being ran. The last time I took it out it worked just fine and stoped almost as soon as I hit the brakes.

Thanks for the help!

I would start by having someone push the brake pedal and watch the piston on the caliper to see if they are moving. check the pads also

Bleed the system and make sure there is not an airlock in the lines.

If you still feel that the master cylinder is the issue....I have a new cylinder in stock.

Glade