We have sold a lot of the original and the after market ball joints with out problem.

The other day we had a customer that said the aftermarket one is to loose, as in falling out loose. I installed some of the aftermarket ones and the last original we have in a lower and upper control arm.

they did fit good, not press in with a press but tapped in with a hammer. no play at all.. the after market ones are knurled to help prevent movement.

my question is has anyone had any issues with them?
Thanks
Eric

I did my ball joints around 9-10 months ago.
I'm not sure if it was an ebay or dealer purchase , but , I did not press them in or hammer/mallet them in.

I remember a couple were fairly loose & I tapped others in a bit with a ratchet.

thanks for the info. I have done some more fitment testing with a new a-arm with a original and a aftermarket on. and the aftermarket ones do fit fine.
did a video of me installing both