Hey guys, finally got a chance to look at the Twister again. I took the carb completley off again and really gave it a good cleaning. I took off the intake and gave it a good visual, cleaned it up and can't see any visible cracks. It's a pretty solid piece of plastic. I put it all back together. My brother-in-law has the same machine but about 6 month newer. I compared the vacuum lines as best I could with mine. I would still love to see a picture or diagram just to make sure. Again, I can get it started with starting fluid. I put the back end up on blocks so I can keep it running. Once I get it started I can keep it running turning the throttle by hand. Once I try to let it idle it stalls. It will not start without a shot of starting fluid. I've adjusted the air intake, still nothing. Any other ideas? I've seen people mention adjusting the valves, what is involved in doing that? I appreciate the quick responses, thanks again. Hope to have good news soon!!!

Check out these guides:

http://www.buggydepot.com/buggy-tech-ce ... -guide/10/

http://www.buggydepot.com/buggy-tech-ce ... Diagram/9/