NST 250 parts?

vanet · **Posted:** Fri Sep 11, 2009 12:40 pm

Carbs are cheap on ebay, and the 250 needs a carb upgrade anyway, why not buy a 30 or 32 mm carb on ebay and adapt it. Van

Sockman · **Posted:** Fri Sep 11, 2009 1:46 pm

The stocker is a 30mm, at least mine was. Not sure about others. I went with a 32mm pumper, but now you're talking more money.

ChuckOrlando · **Posted:** Fri Sep 11, 2009 6:10 pm

Thats what I would do. Either a pumper or slide. Even if you went with the 30mm you would see gains let alone a 32

nascarnate326 · **Joined:** Mon Sep 07, 2009 11:23 am **Posts:** 34

So I have all the wires and connections in pretty good shape besides these two. I assume one of them is for the electric choke on the carb, would that be the one with the connector? How do I know if the carb I am buying has the same connector type? Could I just cut the connectors off and twist the wires together?

thanks guys, this is what I am working with:

thanks for all the help

http://i15.photobucket.com/albums/a360/ ... G_0359.jpg

http://i15.photobucket.com/albums/a360/ ... G_0360.jpg

http://i15.photobucket.com/albums/a360/ ... G_0361.jpg

pghruby · **Posted:** Sun Sep 13, 2009 6:28 pm

That is the standard electric choke connector in your pictures.

BIGE · **Posted:** Mon Sep 14, 2009 2:27 am

most carbs have a electric choke that will just plug right in. some of the 32mm and slide carbs have a manual choke

nascarnate326 · **Joined:** Mon Sep 07, 2009 11:23 am **Posts:** 34

pghruby wrote:

That is the standard electric choke connector in your pictures.

Cool, i am going to get a 30mm one off ebay for 40 bucks and hope it works.

thanks guys!!!

ChuckOrlando · **Posted:** Mon Sep 14, 2009 6:59 am

If it's a 30mm it should be fine