Alternative Parts for Joyner Sand Spider

jbquadrider · **Posted:** Fri Jan 22, 2016 12:13 pm

Bigdawg355
Sounds great keep us updated.

Yoshio · **Posted:** Tue Jul 05, 2016 3:16 pm

Bigdawg355 wrote:

Ok guys I'm fairly new here and to the joyners, picked one up about a month ago. I work at O'reilly auto parts and have found quite a few things that I carry in stock at the store that aren't listed here. I'm in the process of making a list to post for every one. If there is something you're looking for I can try to find it just let me know.

Where is your list? Half year gone - nothing posted here ...

deees321 · **Joined:** Fri Aug 12, 2016 12:59 am **Posts:** 3

Ok guys I just got some new info on rear bearings
Koyo dac3055w
Yamaha 93305-00602-00
Arctic cat 1402-027
kawasaki 92045-0123 and 92045-0800
Now what's awesome is I bought 92045-0800 and I opened it and it was a made in Japan koyo dac3055w in the box. They were 25 a pop out the door. The cheapest I could find the koyo for was 30+online

jbquadrider · **Posted:** Tue Sep 27, 2016 12:22 pm

deees321: Added info to the list.
Thank You

deees321 · **Joined:** Fri Aug 12, 2016 12:59 am **Posts:** 3

Ok small issue fixed. The stant 11807 cap does not fit any of My three 650s. So I went the the parts house and went through them all with my empty tank in hand lol. The stant number that was good for mine is 10725 thanks

deees321 · **Joined:** Fri Aug 12, 2016 12:59 am **Posts:** 3

Hey I found a 60 amp alternator that's bolts right up. Internally regulated. It's a nissan 1980 nissan 200sx. Autozone number 14303
Just needs one spacer I used a big nut and it's done

jbquadrider · **Posted:** Tue Nov 29, 2016 7:29 pm

deees321
Thanks added to the list.

Ghosthunter · **Posted:** Wed Nov 30, 2016 12:47 pm

Best replacement part yet,YXZ1000r.Ghost

KWITCHERBITCHIN · **Joined:** Fri Jan 06, 2017 8:04 pm **Posts:** 1

I am new to Joyner buggies. I bought 2-650's, 1 with the Fast Freddy's set up and one stock. Thank you for the amount of time and info put into this thread. these buggies while old, are a blast to drive. We have a place in Parker AZ., There wasn't a way I was coming up with 10-40k for a RZR, I found the Joyners and can see an 1100SV down the road. thank you again for this list.

jbquadrider · **Posted:** Fri Jan 06, 2017 8:34 pm

No problem had a lot of fun with my SS650

LoneSCJoyner · **Posted:** Mon Mar 27, 2017 10:06 pm

jbquadrider wrote:

No problem had a lot of fun with my SS650

I am picking up an 06 SS next week and would love to get this parts list

AntiSocialMotorist · **Posted:** Tue Apr 04, 2017 9:22 am

PFI wheel bearing PW30550030/25CS and PW 30550032CS (UK based roughly £20 each, managed to get a deal for all 4 £60)

Also replaced the CV boots, used a Universal kit and cut them down to fit no problem £3 quid a boot with grease and bands.

Steven_0 · **Posted:** Fri Aug 03, 2018 9:07 am

You can add PFI bearings as a replacement for the front
They are the same as the arctic cat 400 #0402-275
PFI partnumber: PW30550030/25CS

According to PFI, the bearings 30x55x30-25 are the same for the following models of arctic cat:
atv250 199-2004
atv300 1998-2004
atv400 1998-2004
atv500 1998-2004
atv650 2004
Bearcat 454 1996-1998

dccaldart · **Joined:** Sat Dec 01, 2018 10:20 am **Posts:** 14

Found a new tie rod replacement for joyner 650 sand spider. Hot Damn that was annoying. I will order one into O'reilly's and verify.

looks like 1981 to 1993 Mercedes 190e and 190d used them. lots available.

moog-es3018r = m12 - 1.5 rh about #30 each
moog-es3017r = m12 - 1.5 rh

Just add a L for left hand thread but i believe all ss are right hand.

Link to part:

https://www.moog-suspension-parts.com/moog-es3018r

Link to data page for moog tie rods:

https://www.moog-suspension-parts.com/u ... d_ends.asp

cheers

UPdate: while the information above is accurate i did not buy one. After talking to a guy on facebook that has 6 sand spiders he told how to do a heim joint. Much better and easier. Just use a 1/2 x 20 tap and thread the new joint in. It took me about 10 minutes and i was done. It is a high angle joint so works perfect.

I used this heim joint. The thread is 1/2" x 20 Right hand.

Ebay part info:QA1 PCYMR8T High Misalign Chromoly Heim Joint Rod Ends 1/2-20 RH Male

You will have to go to home depot and get 2 1/2 x 20 jam nuts as these did not come with them. Also you will need a grade 8 1/2 bolt with two washers to link them to the spindle.

jbquadrider · **Posted:** Sat Mar 02, 2019 9:30 am

Let us know if it works and I'll put it in the list

dccaldart · **Joined:** Sat Dec 01, 2018 10:20 am **Posts:** 14

will do

gnar215 · **Joined:** Mon Mar 11, 2019 10:26 am **Posts:** 1

Does anybody have any idea where to find a RR axle w CV joints or just the outer CV joint for a 06' 650 SS OEM or alternate. i have looked for a year now. nothing.
Any help is appreciated.

Thanks

alexdick123 · **Posted:** Mon Jun 03, 2019 10:57 am

Hi all adding to the list.

I can confirm the starter by AS-PL model: S6018 it's a direct fit for the 650ss this link https://m.onlinecarparts.co.uk/car-brands/spare-parts-suzuki/alto-1984/4424/10459/starter.html will take you to the site I ordered from. Have not tried any of the others but they all have same mounts.

PGH · **Posted:** Mon Jun 03, 2019 11:30 am

Here are some cross matched part numbers for other vendors of the starter:

AS-PL: STR70162
AUTOELECTRO: AES4191, DRS4361, LRS00491
BOSCH: 0986014360
CASCO: CST40101AS
DENSO: 028000-9940
EAI: 11668
ELSTOCK: 26-1126
HC-Cargo: 111561
HC-PARTS: JS630
HELLA: 8EA726516-001
LAUBER: 22.0630
LUCAS: LRS00491
PowerMax: 8213314
VALEO: 458629

These Suzuki OEM numbers work on the Alto I, II and III:

SUZUKI OE-31100-51A90
SUZUKI OE-31100-78021
SUZUKI OE-31100-81010
SUZUKI OE-31100-84350
SUZUKI OE-31100-M81110
SUZUKI OE-33100-84350

big george fresno · **Posted:** Thu Nov 07, 2019 2:03 am

kick rear end post was just going to post post somthing about 650 spider front spindles came across this very good post with tons of info and ideas thanks so much back to the shop busy building got the motor in it my project is making progress.

Alternative Parts for Joyner Sand Spider

Who is online