It is currently Tue Apr 16, 2024 4:45 am

View unanswered posts | View active topics


Portal » Board index
Search found 10835 matches
Search these results:

Author Message

 Forum: Maintenance and Repairs - Mini Buggy   Topic: Doesn't go into reverse

pud
Posted: Sat Sep 01, 2007 1:10 pm 

Replies: 19
Views: 15189
profaci , i think you have found your problem,yes the 90 degree part of the cable will cause this. if the 90 is broke when you push it in reverse it will give or bind up not letting it go into reverse and yes the 90 needs to be there lets cable pull straight so it can move the shifting fork,also to ...

 Forum: Maintenance and Repairs - Mini Buggy   Topic: Doesn't go into reverse

pud
Posted: Fri Aug 31, 2007 9:14 pm 

Replies: 19
Views: 15189
profaci, after you get your reverse cable tuned in, you mite want to give your reverse box some grease.if you have road this for a year i'm sure it could use it.the correct way to do this would be take it a part and clean it than repack with grease but if you don't want to do this and your box has t...

 Forum: Off Road Go Kart & Mini Buggy Discussion   Topic: Titan 250 choke problem

pud
Posted: Thu Aug 30, 2007 8:16 pm 

Replies: 3
Views: 1203
you are welcome, hope you find what you need. this is a good place to find info and help, so we can keep these buggies in the dirt. pud

 Forum: Aftermarket and OEM Parts - Mini Buggy   Topic: 250cc Performance Parts

pud
Posted: Thu Aug 30, 2007 5:18 pm 

Replies: 43
Views: 13761
i don't like to tell any won what to but i 'm fraid you will get the bad end of the deal. i had my dealings with them. bought paid for sahara 150 buggy month and a half later ended up with a sunl 150b.they have a lot of bad business reports and even a attorny genernal notice on the web about them.on...

 Forum: Off Road Go Kart & Mini Buggy Discussion   Topic: Titan 250 choke problem

pud
Posted: Wed Aug 29, 2007 9:58 pm 

Replies: 3
Views: 1203
daveymac, the way i understand the choke works, it is on when starting with then juice going to the choke heating the needle with spring tension pushing needle down in to choke base shutting choke off. this should happen within a few minutes of running. they need juice all the time when running to k...

 Forum: Engine Clinic - Mini Off Road Buggy   Topic: won't start

pud
Posted: Wed Aug 29, 2007 5:12 pm 

Replies: 2
Views: 1041
acblind, don't know about your buggy but mine did the same thing and it was a 10 amp fuse in the electrical box it wouldn't turn over at all put knew fuse and was just fine. mine was back next to the cdi. in a fuse holder with a cap on it. good luck
pud

 Forum: Off Road Go Kart & Mini Buggy Discussion   Topic: extrememotorsales they are still at it

pud
Posted: Sun Aug 26, 2007 10:18 pm 

Replies: 6
Views: 1675
there website is (extrememotorsales.com) TGT Companies Inc 1025 Sunshine Lane Atamonte springs FL
i had talked a buggy dealer not to long ago and and was told they where up the road from place of business. rather not say who don't want to get anyone in trouble. pud

 Forum: Off Road Go Kart & Mini Buggy Discussion   Topic: extrememotorsales they are still at it

pud
Posted: Sun Aug 26, 2007 9:42 pm 

Replies: 6
Views: 1675
they are located at, Altamonte Springs Florida
they where also into something else before this i think they went by,( Two girls trading )and also i think alot of people got the short end of the stick on this company or corporation.
pud

 Forum: Engine Clinic - Mini Off Road Buggy   Topic: sunl 150 burning oil/no power

pud
Posted: Sun Aug 26, 2007 1:12 am 

Replies: 17
Views: 3937
well profaci i didn't mean to upset you but i havn't read a post here anywhere that i know of, that when uni filter is put on without doing a rejet. i do understand about the cheap foam filter in the sunl b model. the rejet is really not hard to do.just taking carb off, draining gas out of carb, tak...

 Forum: Engine Clinic - Mini Off Road Buggy   Topic: sunl 150 burning oil/no power

pud
Posted: Sat Aug 25, 2007 9:54 pm 

Replies: 17
Views: 3937
profaci, i was reading your post and sorry to here about your bad luck with your motors and read you put on a uni filter on this new motor.i don't want to give bad news but you should rejet your carb or you will do more engine damage.i don't know what your elevation is but i listened to one of the b...

 Forum: Off Road Go Kart & Mini Buggy Discussion   Topic: extrememotorsales they are still at it

pud
Posted: Fri Aug 24, 2007 12:54 pm 

Replies: 6
Views: 1675
well first off i would like to say i didn't join this forum to be a bad mouth but i fill this has to be said. stay away from extrememotorsales or TGT companies Inc. its been 14 months sence my dealings with them and they mite have forgotten me but i havn't forgotten them.they still keep racking up b...

 Forum: Engine Clinic - Mini Off Road Buggy   Topic: comprection

pud
Posted: Thu Aug 23, 2007 3:35 pm 

Replies: 4
Views: 1383
from what i have read on this forum 140 to 150 lbs is good shape. 120 to 125 lbs is not good.... BUT before you do a compression test make sure your valves are set wright, intake .003 inches exhaust .005 inchs for gy6 engine. if you don't have a manual, click on forum on front page,scroll down you w...

 Forum: Modifications - Mini Off Road Kart   Topic: Small upper sprocket

pud
Posted: Sat Aug 18, 2007 12:05 pm 

Replies: 10
Views: 2570
billy, i to had asked this question in a earlier post but got no replys. so i done some measuring, i have the black reverse box with the 16 tooth sprocket. to notice that the bolts holes for the 16 tooth sprocket are only 3/16 to 1/4 inch from ware chain rides in sprocket.16 tooth diameter 3.520 inc...

 Forum: Off Road Go Kart & Mini Buggy Discussion   Topic: another reverse box sprocket question

pud
Posted: Thu Aug 09, 2007 3:47 pm 

Replies: 1
Views: 800
sorry dumb me, i meant to say 13 or 14 tooth sprocket and instead of 18 or 20 i guess what made me say that is that i wish i was that age again also these sprockets have a 1 inch bore.

 Forum: Off Road Go Kart & Mini Buggy Discussion   Topic: another reverse box sprocket question

pud
Posted: Thu Aug 09, 2007 1:54 pm 

Replies: 1
Views: 800
well have found some #50 sprockets running from 10 teeth to 24 teeth with different bores but they do have a key way shaft i was wondering if any one has tried this. taking the sprocket to a machine shop having the key way shaft cut off flush with sprocket. than using stock sprocket as a ten plate t...

 Forum: Off Road Go Kart & Mini Buggy Discussion   Topic: 157qmj engine

pud
Posted: Tue Aug 07, 2007 12:48 pm 

Replies: 13
Views: 8909
vin 99, i will keep my fingers crossed for you. i am curious now have you tried taken your valve cover off and measruring across your studs,where your cam bolts down. try to get as close as possible, center to center of the studs. than go back to gasket picture and look at the measurements and see w...

 Forum: Off Road Go Kart & Mini Buggy Discussion   Topic: 157qmj engine

pud
Posted: Mon Aug 06, 2007 1:41 pm 

Replies: 13
Views: 8909
vin 99, i beleive that is the cylinder gasket. also what i had said earlier about someone not wanting to let the cat out of the bad, it was meant for linhai or who ever is putting these motors together and the motor Block stamped 157QMJ with the two bolt valve cover. it sure will mislead a lot of us...

 Forum: Off Road Go Kart & Mini Buggy Discussion   Topic: 157qmj engine

pud
Posted: Sun Aug 05, 2007 12:32 am 

Replies: 13
Views: 8909
ric, i guess a picture does say a thousand words. i hope i havn't annoyed you to much on this subject. i fully understand now.hopefully i can look your way in the future for some stock engine parts.
thanks pud

 Forum: Off Road Go Kart & Mini Buggy Discussion   Topic: 157qmj engine

pud
Posted: Sat Aug 04, 2007 3:40 pm 

Replies: 13
Views: 8909
well vincego 99 i'm going with a no go on what ric has told me,when he orders parts for the two bolt valve cover style he has to order parts for the 152QMI engine instead 157QMJ to make it work. so i looked a little on the net about the 152QMI couldn't find much myself but a few specs on the 152QMI ...

 Forum: Off Road Go Kart & Mini Buggy Discussion   Topic: 157qmj engine

pud
Posted: Sat Aug 04, 2007 1:16 pm 

Replies: 13
Views: 8909
ric i have taken your advice on not trying the 155cc kit thanks again.its been a little of a up hill battle for me sence june 2006.i will try to make a long story short.i picked out a sahara 150 talk to comany made the foolish mistake of wiring them $2,100 only to end up a month and half later with ...
Sort by:  
Page 541 of 542 [ Search found 10835 matches ]
Go to page Previous  1 ... 538, 539, 540, 541, 542  Next


Portal » Board index

Jump to:  
Switch to mobile site
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

blackLevel designed by GrafsS



phpBB SEO
© Buggynews.com - All Rights Reserved


 
Terms of Use
Copyright
Privacy Policy