***Steve's pics added*** Got My Eastside Performance Package

razoratk · **Posted:** Mon Apr 18, 2005 7:35 am

Got it Friday. As you can see by the Pics, the pipe goes above the frame,
unlike the old one that went under. I had to remove the battery and
shock to instal it. NICE construction all smooth aluminum. On the end are some hex screws I'm guessing to take it apart if you need to.
The Uni Filter/tube mounted up nice. It's all aluminum too. They sent a #135 jet. I have not taken it out to the Wilds yet to test, just on the street.
It is a GREAT Improvement over stock. Plus I started using 91 octane gas.
That helped too. I wonder if it has a spark arestor in it, sure sounds good,
more like a big ATV.

James Lee · **Joined:** Wed Mar 02, 2005 9:05 pm **Posts:** 803

Will it fit a 150cc 2005 Blade.James

razoratk · **Posted:** Mon Apr 18, 2005 8:03 am

They list it as a part for the 2005 Twister Hammerhead but it will fit the
2004 150cc also. It fits my 2004 Vision like a glove. Mine is the same as
a KPX Kart. I would say that if your Blade looks like mine in the Pics, then
it should fit...........

Mark

Kell · **Posted:** Mon Apr 18, 2005 8:05 am

Sounds great, did they explain the reason for all the new curves? I was assuming it was because of oil filter/cooler.
Also, my intake was bare steel that quickly rusted so that's a nice upgrade.

kell

razoratk · **Posted:** Mon Apr 18, 2005 8:10 am

No reason I can see except to get it up higher off the ground. It just fits
over the taller battery I have and is real close to the CVT intake tube.

Hopster · **Posted:** Mon Apr 18, 2005 8:43 pm

Mine took a little longer to get here. For some reason they sent me a 130 jet and I am nearly at sea level. Don't understand that one!! I have other jets to play with anyhow.

Here come LOTS of pics guys.

Hopster · **Posted:** Mon Apr 18, 2005 8:49 pm

This is one serious piece of equipment. It makes a Toy Jukies pipe look like... well, a toy! There is a massive difference in workmanship, quality, and engineering between this and the TJ offering. I can't even begin to explain it. The velocity stack is the exact same unit as supplied by Toy Junkies with their pipe.

-Steve

kammak · **Posted:** Mon Apr 18, 2005 8:58 pm

Kelly wrote:

Sounds great, did they explain the reason for all the new curves? I was assuming it was because of oil filter/cooler.
Also, my intake was bare steel that quickly rusted so that's a nice upgrade.

kell

Kell What size is the inlet on your uni filter.I think I might have to fix you up with a kammak filter out of aluminum.It would be a good chance to get some comparison feedback also.If it performs as good for at least half the price made from aluminum, people would be happy.
Ken

razoratk · **Posted:** Mon Apr 18, 2005 9:01 pm

I think you will be impressed Steve

Mark

heath · **Posted:** Mon Apr 18, 2005 9:04 pm

Awesome! I am anxious to see your comparisons of the performance of the pipes. (especially the redneck variety!)

Looks great! Did they charge you the original price or the exytra 30 bucks or whatever?

Steve's pics added Got My Eastside Performance Package

Who is online