Hi Gang,

Just thought Id pass along with a update.Got vavles adjusted,it helped a little,but it still has that lug or miss at low speeds.

Earlyer today I took the cap off the dist,to see if it was carbon tracked or cracked anywheres.When I removed it,a small spring and what looks like button of sorts,came out of the center of the cap.I tryed to reinstall it,but didnt have much luck.so I just put the cap back on.The machine seems to run ok without it,does anyone have a idea what it did ,or does.

Also,Ive looked everywhere for one of those box spanner,to remove the spark plugs.I wondering if the plugs could be at fault,as those cheap made China plugs do seem miss fire alot.



Thanks again,
Michael

That button and spring in the dist. cap is not supposed to be loose at all. I would replace the cap and rotor. Better quality plugs check out iridium and 8mm wires . Hope this helps