| BuggyNews Buggy Forum https://buggynews.com:443/ |
|
| adjusting valves joyner 650 https://buggynews.com:443/adjusting-valves-joyner-650-t27050.html |
Page 1 of 1 |
| Author: | thepaintedman04 [ Sun Jan 09, 2011 9:35 am ] |
| Post subject: | adjusting valves joyner 650 |
hi im having cold start problems and have been advised that this is more than likely to do with the compression.can someone please give me a step by step instruction on how to set the valves to the correct clearance.thanks for any help!oh and im new to this so make it as simple for me as possible,thanx |
|
| Author: | PGH [ Sun Jan 09, 2011 12:16 pm ] |
| Post subject: | Re: adjusting valves joyner 650 |
1. Remove the valve cover so you can see the valves. 2. Rotate the main crank pulley on the right side of the engine until it lines up with the TDC indicator. 3. You should be at the compression stroke of either piston 1 (right one) or piston 2. The intake and exhaust valves are completely closed on compression. 4. Once you determine which piston is on compression adjust that pair of valves and then rotate the engine another cycle to adjust the other piston's valves. 5. Intake valve lash should be .006 and exhaust should be .008 |
|
| Author: | thepaintedman04 [ Sun Jan 09, 2011 12:52 pm ] |
| Post subject: | Re: adjusting valves joyner 650 |
thanks so much for that.doesnt sound too difficult.anything i need to watch out for? |
|
| Author: | PGH [ Sun Jan 09, 2011 1:17 pm ] |
| Post subject: | Re: adjusting valves joyner 650 |
If you don't already have it, download the Kinroad manual for the 650. It has better information on the engine: post247895.html#p247895 |
|
| Author: | thepaintedman04 [ Sun Jan 09, 2011 2:56 pm ] |
| Post subject: | Re: adjusting valves joyner 650 |
Nyc1 thanx for that uv been very helpful |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|