| BuggyNews Buggy Forum https://buggynews.com:443/ |
|
| Axle for Maxxam 150 2R https://buggynews.com:443/axle-for-maxxam-150-2r-t32726.html |
Page 1 of 1 |
| Author: | cbrmaxxam [ Mon Apr 30, 2012 10:24 am ] |
| Post subject: | Axle for Maxxam 150 2R |
hi guys i have a maxxam 150 2r that i have completly redone and added a cbr600 engine too. i have since bent the axle so now i am looking for a replacement that i will put an extra bearing so it cannot bend. i cant findanywhere that can get the part.. any help would be greatly appriciated. thanks!! Part Number is: 627-0001 |
|
| Author: | PGH [ Mon Apr 30, 2012 10:41 am ] |
| Post subject: | Re: Axle for Maxxam 150 2R |
The Maxxam was built along with the Carters. Many of the Hammerhead 150 parts cross over to the Carter 150, so that would be the first place to start looking. |
|
| Author: | cbrmaxxam [ Mon Apr 30, 2012 10:43 am ] |
| Post subject: | Re: Axle for Maxxam 150 2R |
thats where i got the part number was from a hammerhead manual. i guess carter burnt down so thats w=making it harder to find. i talked to familygokarts.com and thats what they said. i just can find anywhere else to get parts? |
|
| Author: | BIGE [ Mon Apr 30, 2012 11:40 am ] |
| Post subject: | Re: Axle for Maxxam 150 2R |
I can get the hammerhead axles, they fit the carters except the zr and xp 150 |
|
| Author: | cbrmaxxam [ Tue May 01, 2012 6:15 pm ] |
| Post subject: | Re: Axle for Maxxam 150 2R |
If u can get one call me ASAP so we can get one on the way! Lol I takes to max parts I think it was, talked to one cool guy and the other guy have me the runaround. They called me and put me on hold and got pissy with me like I was bugging them. Total bs but yea man call me and well get it figured out! 307 315 0351 |
|
| Author: | BIGE [ Sun May 06, 2012 7:29 am ] |
| Post subject: | Re: Axle for Maxxam 150 2R |
ok, it will be tomorrow as I am about to head out for a ride today |
|
| Author: | BIGE [ Mon May 07, 2012 11:19 am ] |
| Post subject: | Re: Axle for Maxxam 150 2R |
the axle is $115.00 plus shipping |
|
| Author: | mn_buggy2014 [ Fri Apr 25, 2014 4:15 pm ] |
| Post subject: | Re: Axle for Maxxam 150 2R |
I know this post is a couple of years old, but thought I would try. I am also looking for the rear axle and rear steel hub for a Maxxam 150 2R. Here are the part numbers from the parts manual: 627-0001 - Rear Axle 620-0001 - Rear Steel Hub http://www.acesportsparts.com/ seems to carry just about everything else, except these parts (of course). |
|
| Author: | BIGE [ Sat Apr 26, 2014 4:45 pm ] |
| Post subject: | Re: Axle for Maxxam 150 2R |
the maxxam had two versions, one looked like the hammerhead jr and the other had swing arm links. the axles will not interchange, post a pic of the rear of your buggy. |
|
| Author: | mn_buggy2014 [ Thu May 01, 2014 6:47 pm ] | ||||
| Post subject: | Re: Axle for Maxxam 150 2R | ||||
Thanks for the reply and taking time to respond. Just uploaded the pictures, I can send more if needed.
|
|||||
| Author: | jsnscott721 [ Thu May 01, 2014 8:19 pm ] |
| Post subject: | Re: Axle for Maxxam 150 2R |
I know the a HH 150s axle wil not work in your maxxam 150 buggy. I bent my axle in my HH 150 and got one out of my in-laws maxxam 150 to use till he got it fixed....the maxxams axle is offset to much and will not fit a HH 150...They wont interchange....mine is a 2007 and I think his maxxam is a 2006 or 07. I ended up ordering one from BigE. |
|
| Author: | mn_buggy2014 [ Fri May 02, 2014 9:55 pm ] |
| Post subject: | Re: Axle for Maxxam 150 2R |
I did not see an axle on BigE that would work for my Maxxam 150. http://www.carterbrothersparts.com/cart ... -axle.html This looks to be the axle that will work. From what I am reading, Carter and Maxxam are very similar. I am trying to pull the axle off, to get the measurements and hopefully replace  , the service manual says to pull off the axle and bearing/bearing housing as one piece. This is not possible. Any advice on how to get the bearing/bearing housing off of the axle without tearing up the bearings?Any input is greatly appreciated. |
|
| Author: | poordad [ Fri May 02, 2014 10:27 pm ] |
| Post subject: | Re: Axle for Maxxam 150 2R |
I was not sure at first that they would match but I have an axle from a 2006 Carter Talon DLX 150 IIR that is in good shape and available if you are interested. send me a PM and maybe we can get you back on the road
|
|
| Author: | BIGE [ Sat May 03, 2014 8:57 am ] |
| Post subject: | Re: Axle for Maxxam 150 2R |
that picture is the jr. the axles from the asw and hammerheads wont fit. the axle from a gx150IIr will fit. those axles have been discontinued for awhile now |
|
| Author: | mn_buggy2014 [ Sat May 10, 2014 9:52 pm ] |
| Post subject: | Re: Axle for Maxxam 150 2R |
Anyone making custom axles, or is the used market the only hope? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|
