I have a complete GY6 engine with drive & gear box with forward and reverse plus all the wiring and electronics.The only problem is it will need a new or used working stator unit.When within that same unit holds the primary ignition coil needed to produce spark to the secondary and external coil.This one was damaged by mistake one late and very tired dark evening.As I just so happened to cross the battery polarity.As I was installing a new dry cell battery in a optima.I completely tested the entire electronics and this is the only problem.Whats more is it will fire up then die as fast as it comes to life.Do in whole to interrupted spark.When it sparks like a chain would run on sprockets missing enough teeth to all but get going then slipping before another tooth was ever caught.Now along with all the other good stuff this comes with.Like these! @4mm opened to 25mm and swirled for all air flow contact areas then polished in the slide chamber.Flatslide mikuni carb.Plus a large cone shaped summitracing washable air filter with larger air intake tube to the carb.Performance CDI ignition box without rev limiter and performance advace curve! Meaning more power through out the entire rpm range!Plus,performance Variator and extra sets of roller weights in three total sets.The head has been fully ported and swirled to polished in only the right places for that work.And I do mean in COMPLETE! Entire head for all that means more performance.All ports and built velosity ramps, reshaping of ports and size in only certain areas.Bowls cleaned then swirled and the combustion area was done much the same for this exact work.Then a supertrapp disc only tunneable great working exhuast was custom built.Starting right inside the heads exhuast port.You tune by adding or removing the disc's held by six stainless allenheads all nicely counter sunk into the aluminum endcap.Taking away discs add to the lowend and take away from the top.And the opposite for adding will produce all top end power.Plus this is what the US forest service approves as the best spark arrester and works for all in performance! 2nd to nothing for the same!Also the compression was taken from stock and 9.3-1 up to 10-1 so premium gas and afew cap fulls of koltz or equal to in quality octane booster it takes to safely run it without damage!OR simply reasemble using the stock top end gaskets!Hows this for to cool a performance MOD!Two aluminum cooling air scoops are attached to this nice setup.One at engine fan housing and the other on the CVT drive housing.When the fan blades found on one half of the front pulley and varriator.Have every other blade in removed!For less air drag and resistance being created.In return adds more power! And when a 150cc four strokes being used to push whats as heavy as all these buggys so are! Man you need every little thing for more in power one can get!So you are aware.The work and added parts alone on this setup costs a full 375.00!! And this engine etc has only a total run time from factory NEW! OF only four hours max! The new plain jane 150 engine with CVT drive ONLY. Start at 450.00 then go up in price.SO whats not to like or want in this entire loaded package for a smoking low price of 300.00 takes it all with stock carb and stock cdi as extras! OR I am willing to part this out only to whoever will want more than one part of it all.Meaning buy the carb with intake and air filter plus CDI.Type of thing.OR whatever just not the carb or just CDI unit.Make it well worth me time and yours or not at all.IF so then I am willing to sell all or parts in anything till its all gone!Only make note!Parting out makes the parts go for more than buying the entire lot as is!When more time etc then goes hand in hours for all my labor.But for this matter will still save YOU $$$ over anyone else for what your to get.Plus save on shipping when in parts.SO for all with that need let me know and I will get back to you! As well anything you buy.WILL be shipped out just as fast as the money arrives! This much I can and will gurantee!Plus all to anything for info you may want and most should! I will provide.For phyisical address to phone and email.Even drivers license info etc.OR even better!IF you can find the company to deliver the money and pickup the rest at the exact same time frame!Then were all done! thankyou.PS.I have pics or will take for anyone and for what part maybe then sold.

tou should prob put this in the classifieds if it for sale if not the mini buggy