| BuggyNews Buggy Forum https://buggynews.com:443/ |
|
| Different rear hubs on Hammerhead 250ss https://buggynews.com:443/different-rear-hubs-on-hammerhead-250ss-t51354.html |
Page 1 of 1 |
| Author: | Liberty [ Fri Jun 04, 2021 9:58 pm ] |
| Post subject: | Different rear hubs on Hammerhead 250ss |
This might be a stupid idea but I was thinking about getting new rear hubs for 250ss. The problem I have is that I have some nice barely used tires for the rear-mounted on 8-inch rims with a 4x110 bolt pattern. The problem is that I can't fit an adapter inside the rim because it too tight. I was wondering if it would work to buy some 23 spline 4x110 rear hubs and use those instead? I don't want to grind down the splines on my axle and need to replace that because it will likely cost a lot more than buying new tires for my stock rims. A hub like this: https://www.ebay.com/itm/373471057681?c ... qnEALw_wcB or this: https://www.vmcchineseparts.com/product ... XfEALw_wcB |
|
| Author: | whatharley [ Tue Jun 15, 2021 6:59 pm ] |
| Post subject: | Re: Different rear hubs on Hammerhead 250ss |
I believe the rear of a HH is 4x137 ... I have a brand new set of 4 wheels that are 12 " if u would be interested in them |
|
| Author: | PGH [ Tue Jun 15, 2021 7:48 pm ] |
| Post subject: | Re: Different rear hubs on Hammerhead 250ss |
I doubt the brake calipers will clear 8" rims unless you use a crazy offset with spacers. The brakes need a 10" rim or larger. |
|
| Author: | Liberty [ Fri Jun 18, 2021 3:59 pm ] |
| Post subject: | Re: Different rear hubs on Hammerhead 250ss |
I think my plan will be to keep the rims I have right now and buy some new tires to install on the rim |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|